PCD2-FPCMCIACard Drivefor 16-bit ISA compatible machinesUser’s ManualQUATECH, INC. TEL: (330) 434-3154662 Wolf Ledges Parkway FAX: (330) 434-1409Akron
Quatech recommends that Microsoft Windows users install Cardview after installing Cardsoft.Start up Windows to install Cardview. From the Program Man
Resources SettingWe recommend configuring the Host Interface Drive Card in Polling mode instead of IRQmode to prevent IRQ conflict.1. Click the Start
PCD2-F User’s Manual 8
4. USING PC CARDS4.1 DOS and Windows 3.1xThis section describes how to use the PC Cards in DOS and Windows 3.1x. Before Using PC CardsV
Note: All three line must be present.Other switches used with CSALLOC are: 1. CSALLOC /S: Use only if the system has a plug and play BIOS. In this
To install "ATA Support" simply follow these instructions :1. Double click on the "OS/2 System" icon.2. Double click on the "
To install support for SRAM cards under a Windows 95 environment, simply follow theseinstructions:1. Double Click on the PC Card (PCMCIA) Wizard, When
3. Find the line that contains "flash" or some variation of it in the driver name (such asms-flash.sys) and remove the text "REM-by PC
Product Name=<Vender Product Name>[Configuration Info]necessary for running network softwareConfiguring client handle is A65CMemory + I/O interf
Status Value: 08I/O range 3e8-3ef, 8-bitAssigned IRQ is 5 (enabled) The above example is configured for COM 3 and IRQ 5.4.5.2 Fax/Modem Card
1998 - 2002, Quatech, Inc.NOTICEThe information contained in this document cannot be reproduced in any form withoutthe written consent of Quatech, I
5. CARD INSERTION AND BEEPS FOR ALL APPLICATIONS When a card is inserted, a beep will be emitted to inform the user whether Cardso
6. USING QUATECH’S PC CARD LINE WITH THE PCD2-FQuatech manufactures a line of PC Card products, which are compatible with the PCD2-F. 1. Single Por
7.0 TROUBLESHOOTINGThe following are common problems that can occur while installing and using the PCD2-F. 1. During the installation of the Cards
Change the base of the pre-existing device if possible.Please call Quatech’s technical support department for further assistance at (330) 434-3154,Mon
PCD2-FUSER’S MANUALVersion 2.30Part No. 940-0086-230Januarry 2002 PCD2-F User’s Manual
WARRANTY INFORMATIONQuatech, Inc. warrants the PCD2-F to be free of defects for one(1)year from the date ofpurchase. Quatech, Inc. will repair or rep
TABLE OF CONTENTS187.0 TROUBLESHOOTING...176. USING QUATECH’S PC CARD LINE WITH THE PCD2-F..165. CARD INSERTI
1. Introduction1.1 General Information The PCD2-F PCMCIA Card Drive allows ISA bus personal computers to use PCMCIAmemory cards as solid state disket
1.2 SYSTEM REQUIREMENTSThe PCD2-F requires a system conforming to the following specifications:1., IBM PC compatible compu
2. SETUP2.1 PACKAGE CONTENTS1. Host interface adapter.2. Drive unit.3. Flat ribbon cable assembly.4. Software installation disk.5. 4 mount
6, 7The 4th PCMCIA Card Drive4, 5The 3rd PCMCIA Card Drive2, 3The 2nd PCMCIA Card Drive0, 1(Default)The 1st PCMCIA Card DriveSocket NO.JP2 & JP1PC
3 SOFTWARE INSTALLATIONThe PCD2-F card drive includes a DOS PCMCIA card and socket services library calledCardsoft, from Systemsoft. The PCD2-F als
Comments to this Manuals