Quatech SSP-100 User Manual download pdf (Page 34)

3.3 Common Problems

Basic Configuration List Not Available:

A problem noted on some systems is after a basic configuration has been manually

selected is the basic configurations list for the SSP-100 is no longer available. The

solution to this problem is to check the “Use Automatic Settings” box and allow

Windows to reconfigure the SSP-100 card. The basic configurations list should once

again be visible.

Base I/O Address Resource Modification Not Allowed:

The SSP-100 can either be forced to use a “standard” base address for COM1 - COM4,

or it may be configured to allow Windows to assign the base address. Windows will

not allow the base I/O address resource to be modified if the SSP-100 is configured to

use a “standard” base address, since it is being forced to a certain value by definition.

The solution to enabling a user defined I/O address resource is to select a basic

configuration which allows Windows (and the user) to assign the base address.

SSP-100

User’s Manual

3-11

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 50 51

No comments

Quatech SSP-100 User Manual Page 34