Quatech AirborneDirect ABDB-ET Series User's Guide download pdf (Page 17)

Hardware Installation

100-8006-152G AirborneDirect™ Serial Bridge User’s Guide Page 11

Quatech, Inc. Confidential

STANDARD PACKAGE HARDWARE DESCRIPTION

Figure 3 identifies the components on the Bridge in its standard packaging. These components

include:

 An external antenna.

 A DB9 male DTE connector and cable attached to the Bridge.

 A Reset switch and interface selector shunts on the bottom of the Bridge.

 Three indicator Light Emitting Diodes (LEDs) on the top of the Bridge.

 A mounting cradle.

Figure 3. AirborneDirect™ Serial Bridge Hardware (standard package)

Reset Switch

The bottom of the AirborneDirect™ Bridge provides access to a Reset Switch. The Reset switch

returns all Bridge parameters to their factory default firmware settings. To reset Bridge

parameters, press (and hold) this switch for at least 5 seconds after power is applied to the

Bridge. To protect against accidental resets, the Reset switch is recessed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 108 109

No comments

Quatech AirborneDirect ABDB-ET Series User's Guide Page 17