Quatech DSP-100 User Manual download pdf (Page 18)

R instructs the Enabler to release the resources previously allocated to the

DSP-100. When the 'R' option is used, any settings specified by the 'B', 'I',

and 'U' options are ignored.

2.2.1.1 Example 1

DSP100EN.EXE

In example 1, no command line argument is specified. The Enabler will report an error

and display the proper usage of the command.

2.2.1.2 Example 2

DSP100EN.EXE (s0,b300,i5)

In example 2, the Enabler will configure the DSP-100 in socket 0 with a base address of

300H and IRQ 5 using a configuration memory window at segment D000. The

DSP-100's interrupt status register will be enabled.

2.2.1.3 Example 3

DSP100EN.EXE (i10,u,b340,s1)

In example 3, the Enabler will configure the DSP-100 in socket 1 with a base address of

340H and IRQ 10 using a configuration memory window at segment D000. The

DSP-100's interrupt status register will be disabled (Scratchpad registers enabled).

Note that the parameter order is not significant.

DSP-100 User's Manual 12

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 56 57

No comments

Quatech DSP-100 User Manual Page 18