Quatech DSP-100 User Manual download pdf (Page 21)

3. Windows 95 Installation

To allow easy configuration of the DSP-100, an Windows 95 "INF" configuration file

has been written for the hardware. This configuration file supports the DSP-100 in both

addressing modes: block mode and “com” mode.

3.1 Installing a DSP-100 Under Windows 95.

1. Insert the DSP-100 into any available PC Card socket.

2. The first time a new PC Card type is installed the New Hardware Found

window opens. After this first installation Windows 95 will automatically

detect and configure the card. If the New Hardware Found window does

not open, then skip to the next section, “DSP-100 Resource Settings".

3. The New Hardware Found window provides several options to configure

the DSP-100 card. Click the "Driver from Disk" option button. Click "OK"

to continue.

4. An "Install from Disk" dialog box should appear. Insert the diskette with

the "DSP-100.INF" file, select the correct drive letter and path, (you may

have to browse the Quatech COM CD to find the INF file) .and click "OK".

Windows 95 will browse the path for the aforementioned files.

5. During the installation process, it may be required to supply the computer

with the Windows 95 CD or installation diskettes. The DSP-100's serial

devices will require the file "SERIALUI.DLL". Insert the CD or diskette

and click "OK".

IMPORTANT NOTE:

If the user already has these files installed on the

computer, or if the installation disks are unavailable, it

may not be necessary to supply the computer with the

Windows 95 CD or installation diskettes. If prompted for

the disks, click “OK”. A dialog box with an option to skip

will appear. Click the “Skip” button and the files will not

be installed. If these files exist in the windows system

directory, those files will be used.

The DSP-100 PC Card should now be configured. In the future, Windows 95 will

automatically recognize and configure the DSP-100.

DSP-100 User's Manual 15

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 56 57

No comments

Quatech DSP-100 User Manual Page 21